Stainless Steel Fasteners is also known as inox fasteners or inox steel. It is derived from the French word “inoxydable”. It is composed of minimum 10.5 % chromium. One example of non-magnetic fastener is Stainless Steel A2 Bolts (304, 18/8), itis an inox stainless steel bolts. In A2 bolts material chromium provides a corrosion and oxidation resistance; however, it can tarnish. Most common types of stainless-steel bolt are SS 304 bolts. SS 304 fasteners contains both chromium (18–20%) and nickel (8–10.5%) as the main non-iron constituents. Siddhgiri Tubes is government approved Stainless Steel Fasteners Manufacturers in India. We supply a various range of Stainless Steel nut bolt which are used for construction purposes in land, in water (rain water and fresh water) and other harsh environmental conditions.
Hex Bolt, Hex Head Bolt, Eye Bolt, Square Bolt, U Bolt, T Bolt, Counter sunk Bolt, Lag Bolt etc.
Main Types of SS 304 Nut
Hex Head Nut, Coupling Nut, Square Nut, Wing Nut, T Nut, Panel Nut, Dome Nut, Acorn Nuts, Lock Nut, Eye Nut etc.
Main Types of SS 304 Screw
Hex Head Screw, Threaded Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc.
Main Types of SS 304 Washer
Machine Washers,Lock Washer, Sealing Washer, Star Washers, Split Washer etc.
Fasteners Packing:
IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Specialized manufacturer of
High Tensile Fasteners, Bolts
Aerospace Bolts
Types of Aerospace Bolts
Test Certificates
EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
SS Fasteners Grades
Stainless Steel Chemical Composition
Below is the chemical composition of A2-70 material (standard chemical compositions of 304 stainless steels grades is also given for information).
Grade
C
Mn
P
S
Si
Cr
Ni
Cu
A2-70
Min
-
-
-
-
-
15.0
Max
0.1
2.0
0.05
0.03
1.0
20.0
19.0
4.0
304
Min
-
-
-
-
-
18.0
8.0
Max
0.08
2.0
0.045
0.03
0.75
20.0
10.5
304L
Min
-
-
-
-
-
18.0
8.0
Max
0.03
2.0
0.045
0.03
0.75
20.0
12.0
304H
Min
0.04
-
-
-
-
18.0
8.0
Max
0.10
2.0
0.045
0.03
0.75
20.0
10.5
Whenever the chromium content is below 17%, the minimum nickel content must be 12%
If the maximum carbon content is 0.03%, maximum nitrogen should be around 0.2%
Stainless Steel Physical Properties
Physical properties of stainless steel 304 grade in the annealed condition.
Grade
Density (kg/m³)
Elastic Modulus (GPa)
Mean Co-eff of Thermal Expansion (μm/m/°C)
Thermal Conductivity (W/m.K)
Specific Heat 0-100 °C (J/kg.K)
Elec Resistivity (nΩ.m)
0-100 °C
0-315 °C
0-538 °C
At 100 °C
At 500 °C
304/L/H
8000
193
17.2
17.8
18.4
16.2
21.5
500
720
Stainless Steel Mechanical Properties
The mechanical properties of material supplied for transforming into bolts, screws and studs conforms to the optimum requirement of the standard below. For comparison and information, “normal” mechanical properties of 304 are given in the table below.
Grade
Tensile Strength (MPa) min
Yield Strength 0.2% Proof (MPa) min
Elong (% in 4D min)
Red of Area (% min)
Hardness (HRC max)
A4-70
700
450
40
Not required
Not required
304
515
205
40
55
15
304L
485
170
40
55
15
304H
515
205
40
55
15
Note: For diameters above 1.1/2” (38.1 mm), core properties may be lower than indicated by the test results which are based on values determined at ½ radius.
Stainless Steel Price List
Fasteners Types
Price Per Pcs.
Hex head bolt price
USD $6.23
Machine bolt price
USD $5.45
Screws price
USD $3.39
Socket Head Cap Screw price
USD $3.39
Allen bolt price
USD $5.01
Dowel Pins price
USD $1.39
Nuts price
USD $1.39
Washer price
USD $1.39
Types of Stainless Steel Fasteners
Stainless Steel Threaded Rod
Stainless Steel Hex Nuts
Stainless Steel Grub Screws
Stainless Steel Self Drilling Screws
Stainless Steel Self Tapping Screws
Stainless Steel Socket Head Cap Screws
Stainless Steel Set Screws
Stainless Steel Shoulder Bolts
Stainless Steel Heavy Hex Nuts
Stainless Steel Lock Nuts
Stainless Steel Washers
Stainless Steel Self Locking Nuts
Stainless Steel Nylon Insert Nuts
Stainless Steel Coupler Nuts
Stainless Steel Hex Cap Screw
Stainless Steel Heavy Hex Bolt
Stainless Steel Elevstor Bolt
Stainless Steel Elevstor Bolt
Stainless Steel Carriage Bolt
Stainless Steel Flange Bolt
Stainless Steel Heavy Hex Bolt
Stainless Steel Allen Cap Screw
Stainless Steel Machine Screw
Stainless Steel Flat Washers
Stainless Steel Machine Washers
Stainless Steel Round Washers
Stainless Steel Square Washers
Stainless Steel Spring Washer
Stainless Steel Lock Washer
Stainless Steel Spherical Washer
Stainless Steel Tab Washers
Stainless Steel Fender Washer
Stainless Steel Ogee Washer
Stainless Steel Dome Tooth Washer
Stainless Steel Countersunk Washer
Stainless Steel Studbolts
Stainless Steel Tie Rod
Stainless Steel Double Ended Stud
Stainless Steel Studbolt
Stainless Steel J Bolts
Stainless Steel U Bolts
Stainless Steel Square Bolts
Stainless Steel Hanger Bolt
Stainless Steel Eye Bolt
Stainless Steel Lag Bot
Stainless Steel Carriage Bolt
Stainless Steel Tie Bar
STAINLESS STEEL NUTS
Stainless Steel Hexagon Nuts With Flange
Hexagon nuts with flange with metric fine thread
Hexagon Nuts (With Non-Metallic Insert) Type 1
Hexagon Nuts With (All-Metal Nuts) Type 2
Hexagon Nuts Style 1 - Product Grade A and B
Hexagon Nuts Style 2 - Product Grade A and B
Hexagon Nuts Low Type (Chamfered)
Low Hex Nuts Without Bevel - Classification B
Hexagon Nuts Style 1 With Metric Fine Thread
Hexagon Nuts Style 2 With Metric Fine Thread
Low Hex Nuts(Chamfered) With Metric Fine Pitch Thread
Hexagon nuts with flange and (with non-metallic insert)
Hexagon nuts with metric fine thread
Hexagon nuts with (all-metal nuts)
Hexagon nuts with clamping part
Hexagon nuts with low form with non-metallic insert
Castle nuts low form with roll crown
Stainless crown nuts (without roll crown)
Stainless Steel Crown nuts (with roll crown)
Stainless Steel Castle nuts low form without roll crown
Stainless Steel Hexagon nuts
Stainless Steel Closed nuts
Stainless Steel Cross hole nuts
Stainless Steel Slot nuts
Stainless Steel lock nuts
Stainless Steel knurled
Stainless Steel Knurled nuts low form
STAINLESS STEEL CAP SCREWS
ISO 1207 Slotted cheese head screws
ISO 7048 H cylinder head screws with cross recession, shape H
ISO 7048 Z cylinder head screws with cross recession, shape Z
ISO 1580 flat head screw, product grade A
ISO 7045 H flathead screws with Phillips, form H – Product grade A
ISO 7045 Z flathead screws with Phillips, form Z – Product grade A
ISO 21269 Machine screws with hexagon and metric fine thread
ISO 4762 Machine screws with hexagon
ISO 14579 cheese head screws with hexagon socket
ISO 14580 cheese head screws with hexagon socket, low head
ISO 7380-1 screw with flattened Panhead – Part 1: Bolts with flattened Panhead with Allen
ISO 14583 flat-head screws with hexagon socket
CSN 02 1128 capstan screw
STAINLESS STEEL HEX BOLTS
EN 1665 F Hexagon bolts with flange, heavy series, Form F
ISO 4014 Hexagon bolts with shaft, product classes A and B
ISO 4017 Hexagon bolts with thread to the head – Product grades A and B
ISO 8676 Hexagon bolts with thread to head, metric fine thread
ISO 8765 Hexagon head bolts with shank, metric fine thread
ISO 4018 Hexagon bolts with thread to head
ISO 4016 Hexagon bolts with shaft, product class C
EN 24015 Hexagon head bolts with shank, relieved shank
CSN 02 1104 Bright hexagon bolts with hole in the head
CSN 02 1105 Bright hexagon bolts with slot
CSN 02 1105 B Bright hexagon bolts with slot
STAINLESS STEEL COUNTERSUNK SCREWS
ISO 10642 countersunk screws with hexagon socket
ISO 14584 flat-head screws with hexagon socket
ISO 2009 Slotted countersunk head screws (common head style) product class A
ISO 7046-1 H countersunk screws (common head) with Phillips, form H – Product grade A – Part 1: Strength class 4.8
ISO 7046-1 Z countersunk screws (common head) with Phillips, form Z – Product grade A – Part 1: Strength class 4.8
ISO 7046-2 H1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 1
ISO 7046-2 H2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 2
ISO 7046-2 Z1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 1
ISO 7046-2 Z2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 2
ISO 2010 Raised countersunk head slot (unit head) Classification A
ISO 7047 H Raised countersunk head (unit head) with Phillips – product class A, Form H
ISO 7047 Z Raised countersunk head (unit head) with Phillips – product class A, Form Z
STAINLESS STEEL OTHER SCREWS
CSN 02 1121 Four head bolts with dog point
CSN 02 1122 Square heads bolts with collar and half dog point with rounded end